Q20 smart automation kit, Controller for underfloor heating, 8 zones, Full wireless, 4 Smart Wireless Thermostats, e-Hub

Q20 smart automation kit for underfloor heating or radiators with distributor, Management and monitoring of 8 zones, Full Wireless, 4 Smart Wifi Thermostats, e-Hub included, Control by phone, ideal for controlling heat pumps, gas centrals or electrical

The solution we propose, with a smart central unit and wireless thermostats, with remote control through the application, is modern and much more reliable. The set is intended for underfloor heating systems but also for systems with centralized radiators through the distributor, for houses and apartments and can be used for new installations, under construction as well as for already installed installations. Professional quality of the products.

Most of the time it is found that the thermostats prepared and mounted at a fixed point are not placed in the best places; for example, they are mounted too high, too low, the place is directly in the sun or in an area where currents are created, and they cannot be moved easily, being wired through the walls, in the plaster.

Special, modern design complemented by constructive quality and top functions. The Quicksmart Q20 automation set is an innovative, modern, professional quality product, designed for long-term operation and ease of installation and use.

The Quicksmart Q20 set contains:

• Central Unit 8 zones with wireless connection, wireless for central thermostats
• 4 Wireless and Wifi thermostats
• a gateway hub for remote phone control
• a radio frequency receiver for connecting wirelessly with your control panel.

The set requires specialized installation, please contact qualified personnel, heating installers or electricians.

1. Wireless central unit for connection with room thermostats

The central unit can receive and send control signals for a maximum of 32 actuators coming from a maximum of 8 Wireless thermostats and can also control the boiler or circulation pump. The system works with any distributor and any actuator. 

Quicksmart Q20 central unit functions:

• Wireless connection of two Q20 controllers, with a receiver (house with floors)
• Wired connection with the central unit (if you do not opt ​​for Wireless)
• Wireless connection, without wires with room thermostats
• It is mounted on any distributor, floor heating or heating  with radiators
• Selectable from thermostat, Warm or Cold mode for heat pumps
• Allows the connection of the same thermostat on several zones, maximum 8 thermostats and 8 zones
• Selectable NO or NC actuators,  can work with up to 32 thermal actuators
• Boiler and pump delay time adjustable, 0-6 minutes

Technical data of the Quicksmart Q20 central unit:

• Power supply: 230 VAC, 50/60 Hz
• Circulation pump output: 230V
• Frequency: 868Mhz for thermostat connection
•  8 zones (5 actuators/zone)
• Boiler output: voltage-free output
• Max. Current: 5A for each output
• Can be used with NC (Normally Closed) or NO (Normally Open) actuators
• Dimensions: 353.5mm x 118.4mm x 59.5mm.

2. Quicksmart Q20 Wireless and Wifi thermostat 

•  Thermostat compatible with gas and electric plants. Compatible with underfloor heating.

•  Premium construction, matte finish, top features. Application interface, updated UI.

•  Remote control from the phone using the Smart Life application. Voice control. 

•  4 full automatic programs or manual settings. Sharing access through the application with all family members.

•  Amazing display with mirror effect and touch buttons. The large screen can be read clearly with the backlight.

•  The display shows the set temperature as well as the measured temperature, the time, the schedule of the day.

•  The thermostat is supplied with a wall mounting frame and base, USB cable, Charger. 

Quicksmart Q20 thermostat technical data :

·         Thermostat power supply: 2*AA battery or USB; 5V/1A

·         Backup storage: EEPROM

·         Maximum voltage / load (ohmic): 250 VAC/10 A.

·         Frequency: 868 MHz

·         Switching options: 7 days, 4 periods each day.

·         Temperature settings: 5°C - 35°C, 0.5°C steps.

·         Accuracy: +/- 0.5°C

·         Thermostat dimensions: 125*98*23.5MM

·         Degree of protection IP: 20.

3. Receiver Q20, radio frequency receiver

·        Power supply: 230 VAC, 50/60 Hz

·        Frequency: 868Mhz for connecting the Receiver

·        Supports wireless, wireless connection with two Q20 controllers

4. Smart e-Hub gateway for remote control through the application

e-Hub is designed to be quick and easy to configure to remotely control your thermostats through the app. Just follow the setup instructions in the Smart Life app and you'll soon have full control over your home heating system.

The Smart Life smartphone application, free in the App Store and Play Store, is the best application for centralizing and remote control of Smart devices, which in turn can be integrated into Google Home and Alexa and thus control all smart devices in one place!

Smart Life offers an extraordinary experience with smart home appliances, including smart plugs, smart lights, air conditioners, humidifiers.

As long as your device works with Smart Life, you'll be able to create automation tasks through the IFTTT platform as well as directly from the app.

·        Power supply: 230 VAC, 50/60 Hz

·        Frequency: 868Mhz 

·        Internet connection for remote control

·        Supports up to 25 thermostats

Presentation image.

Actuators are purchased separately. 

Qsmart electrothermal actuator NO normally open or NC normally closed, 230V, M30*1.5mm

Q20 smart automation kit for underfloor heating or radiators with distributor, Management and monitoring of 8 zones, Full Wireless, 4 Smart Wifi Thermostats, e-Hub included, Control by phone, ideal for controlling heat pumps, gas centrals or electrical